How to solved MB SD C4 "Device not in use" error Solution

How to Coect the multiplexer to Dell 360 ruing XP by using the external software HDD with VMware player, the multiplexer displaying “Device not in use” error message.
Symptom/ Attempt:

The main unit green light illuminated. When try to coect the C4 to laptop with diagnostic cable, there was no coection. The SD card slot was empty. When coect through wireless communication, no WLAN on the external software HDD.

The “Device not in use” error may due to the following three reasons:

1 The link between the diagnosis multiplexer and the diagnostic socket is interrupted.
2 The link between the diagnosis multiplexer and the diagnostic unit is interrupted
3 The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 32) is faulty

Please seek help to mbstarshop technical support. The commom reason is on account of the third reason.

Solution:

Because is using static IP address to carry out wireless diagnosis, so users please reset the IP address in Windows XP network coection.

Result:

The SD icon showed number 5 with an open padlock. Xentry and DAS software worked well immediately. Go so far as to multiplexer took me more time to display nice.

برچسبها: SD coect C4, MB SD coect C4